Skyworth Universal Remote Codes and Instructions

Do you wish to program your universal remote for Skyworth tv to work with other devices? The Skyworth remote has an amazing feature which can be programmed to operate other devices apart from Skyworth tv. This remote control for Skyworth tv only requires the needed codes to control other devices.

Skyworth Universal Remote Codes List

Our list of Skyworth tv remote codes are specifically collected in this article to help you when programming the device. If you want to operate more than one device using a single remote, it only requires a unique Skyworth tv universal remote code. The Skyworth tv code varies from one device to other because of different model number and brand.

Skyworth Universal Remote 5 Digit Codes

  • 16165
  • 00037
  • 11799
  • 00817
  • 13253
  • 00264
  • 00753
  • 17067
  • 00009
  • 00556

Skyworth Universal Remote 4 Digit Codes

  • 0264
  • 3253
  • 0037
  • 0701
  • 0696
  • 6191
  • 0817
  • 0009
  • 0556
  • 0748
  • 0727
  • 0753
  • 0698
  • 0691

Skyworth Universal Remote 3 Digit Codes

  • 202
  • 753
  • 817
  • 531

But once, you have saved the right Skyworth tv code, you can fully enjoy the features of your tv and other programmed devices. We provide the list of all the Skyworth tv codes and you only have to match it with your preferred device.

See also  Innovage Jumbo Universal Remote Codes and Instructions

How to Program Skyworth Universal Remote

The only key to control a number of devices using a single Skyworth tv remote is to program it using compatible codes. The programming process does not need a tech savvy individual to assist you. This article will provide you with all the instructions you need to kick start with the programming.  Just take a closer attention to every step and follow all the guidelines stated below to reap positive results. One of the most important keys to take note in programming is the Skyworth tv universal remote code so better match your device carefully.

Here are the instructions on how to program the Skyworth universal remote:

How To Program A Universal Remote For Skyworth TV

There are several universal remotes available to control Skyworth Tv. However, I will suggest your sky GE universal remote to control your Skyworth television. Universal remote programming is much simple and doesn’t need any technical knowledge. See the instructions below.

  • Turn on your Skyworth television that you want to program with the universal remote.
  • Make sure to insert new batteries into the remote. 
  • To start programming long-press the “SETUP” key on the remote until the LED light (indicator) is illuminated. 
  • Find the device button. If you want to program your TV, then press the “TV” key on the remote. The LED indicator flashes once and remains on.
  • Now this time, enter the code that you selected for your Skyworth Tv. The Indicator will turn off. 
  • Once done with this procedure, control the volume, and change the channels with help of the universal remote. If the TV responds to the remote commands, which means the remote was programmed successfully. If not, try to reprogram your remote with the next code.
See also  Emerson Universal Remote Codes and Instructions

How To Program Universal Remote Without Codes

  • It is an alternative method. The remote will scan the correct code for your device when you switch to this method. The remote will send several codes to the device to find the correct code for your device. follow the instructions stated below to program your remote with this method.
  • Turn on your Skyworth TV that you would like to program with the universal remote. 
  • Enable the setup mode by pressing “SETUP” on the remote until the LED light is illuminated on the remote. 
  • After this, press the “TV” key once for device selection. The LED light will flash once and stay solid.
  • After this, press and release the “POWER” key on the remote to send the first batch codes to the device. The LED light will blink several times while sending codes to the device. 
  • If your device is turned off, move to the next step. If not, start the procedure from step1.
  • Now review the individual codes by pressing the “volume+” key on the remote. The remote will send the codes again to the device. After this procedure, if the device received the correct code, it will be turned off. If not, press the “volume+” key every three seconds until the device gets the correct code. If the device gets correct, it turns off. 
See also  Supersonic Universal Remote Codes and Instructions


Are you enjoying the programming procedure and found this article helpful? if you do, please let us know and share your experience here. Let us know what code you have used to successful paired with which device. Your experience might be of big help to other readers also. Leaving us a message below is the key.

Leave a Comment