Not Working

Why My Dish Network Remote Control is Not Working

Are you looking for a solution for your Dish network remote? If yes, you have come to the right place. Here, I will explain troubleshooting, Dish hopper, and remote issues. You can resolve any problem with your Dish network after reading this post. This post will help you to fix the problem in all your Dish network devices. I discuss the step-by-step issues like reprogramming dish remote to tv and their solutions, which will help you to resolve your Dish network not working problem.

Solution 1: Swap The Batteries:

The Dish remote can’t send solid signals to the device if its batteries run out. Inset a pair of new batteries into the remote and try to control your device using this remote. In addition, you must select the mode button before using it for your device, which means if you want to control your TV using the remote, press the “TV” button on the remote. The remote recognizes the device to control it.

See also  Element Tv Remote Is Not Working 

Solution 2: Program The Remote:

Sometimes the remote may be lost its programming due to unknown reasons. Ensure all the cables connect to your device and program the remote using the correct code. After this, press test the remote buttons to control your device. If it works as expected, the remote successfully connects with the device.

Tip: Remove the batteries from the remote and press the “POWER” button for more than 15 seconds before programming your remote or use program dish remote without code process to setup. It erases the current program and avoids malfunctioning issues.

Dish Network Troubleshooting Remote

If you can’t control your Dish network devices after swapping the batteries in the remote, you will need to troubleshoot all your devices, as mentioned below.

Solution 1: Find The Correct Remote:

If you are using multiple remotes in your home, it becomes challenging to find the correct one. Place all your remotes at the receiver and press the “LOCATE REMOTE” button that sends the signals to a paired remote. The paired remote beeps when it receives correct signals from the receiver. On the other hand, If you use a universal remote, you can control all your entertainment devices simultaneously instead of getting confused.

See also  Element Tv Remote Is Not Working 

Solution 1: Run The Power Cycle:

If the methods mentioned above are not working, you must run the power cycle. Unplug all the cables from your devices and wait for 10 minutes. After that, plug all the wires correctly into your device and turn them back on. Now locate the remote towards the device from the nearest distance and test the remote to control your Dish network devices such as receiver. If this procedure doesn’t work, find another solution to resolve your issue with the Dish network remote and receiver.

Solution 3: Reset your Receiver: 

If you still have the problem, you must rest your receiver. Follow the instructions below to reset your receiver.

  1. Press the “HOME” or “MENU” button three times on the remote to go to the “diagnostic” screen.
  2. Select the “receiver” option.
  3. After this, select click the reset factory tab to reset your receiver.

Solution 4: Remove the Obstructions:

Suppose any obstructions between Dish and the sky, such as birds, trees, or weather, may interrupt your Dish network signals. Call customer care to remove the obstacles. If the problem is with the weather, wait until it clears.

See also  Element Tv Remote Is Not Working 

Dish Hopper Remote is Not Working

If you think your Dish Hopper is not working correctly, you can do dish network remote reset easily.

  1. Press the “HOME” or “MENU” button three times on the remote.
  2. The “Diagnostic settings” will appear on the screen.
  3. Now, select the “Tools” option.
  4. After this, select the “HOPPER RESET” option to reset your Hopper.

If this article is helpful to you, please share your opinion with us through the comment box. If you find another solution that needs to be published here, mention it.

About the author


Hello, my name is Eshwar and I am an expert in the field of remote controls. Having tested various types of universal and branded remotes, I have gained extensive knowledge on how to program and troubleshoot remote issues.Additionally, I am a professional content writer specializing in remote replacement and I have a proven track record in solving remote-related problems.

Add Comment

Click here to post a comment