TV

Vivitar Universal Remote Codes For Sony TV

Sony TV Vivitar remote setup guide

Suppose you are using a Sony TV and want to have some Vivitar universal remote codes for Sony TV to program your own universal remote without any headache. Then you should read this post till the end, and here you will get a list of Vivitar universal remote codes, which you can use without any tension. You can copy the codes we are sharing below to use. Let’s have a look.

Vivitar Universal Remote Codes For Sony TV List

1001

1135

1036

1093

1177

In the user manual or a booklet that comes with your new remote, you can notice these codes. Vivitar remotes accept all types of Sony TV devices. You can control all the devices in a single step with the Vivitar universal remote that reduces keeping a bunch of remotes.

See also  GE Universal Remote Codes for RCA TV

Programming a universal remote is very easy if you have the working Vivitar universal remote codes for Sony TV and the perfect programming steps like Vivitar universal remote codes sony DVD player. We will talk about the programming instructions and remote codes. Please follow them. 

How To Program Vivitar Universal Remote Without Codes For Your Sony Tv

You don’t need to enter a code manually in this method. It goes under the scanning process and adopts the correct code for your device to make the program. 

Step 1: Switch on your Sony Tv that you want to program with the Vivitar universal remote.

Step 2: Find the Tv device button on the remote and press it for five seconds. The small LED blinks two times and remains on to indicate the device is ready to program. 

Step 3: Locate the remote to the device and press the “CHANNEL + and CHANNEL-“ buttons using the remote keypad. 

See also  ONN Universal Remote Codes For Hisense Roku TV

Step 4: After this, press the “UP and DOWN” buttons continuously till the Tv turns off.

Step 5: Press the “POWER” button to verify the code. Your device will turn on. Change the channels and check the volume by using your remote.

Step 6: Finally, press the “DEVICE” button to save the code. The small LED blinks twice to confirm the code is stored successfully. 

Conclusion:

If you have any problem with this method, repeat the same procedure until step 5, or you can switch to the code entry method to program the Vivitar universal remote which is mentioned in sony universal remote programming post. 

About the author

Andrew

I am Andrew author of this blog I do write articles related to tech and i am expert in programming universal remote with any brand and good at fixing the issues while setup remotes

Add Comment

Click here to post a comment