Magnavox Universal Remote Codes & Program

If you want to program your Magnavox remote, you need the Magnavox TV code. So here in this fantastic blog, I will share the code list and the instructions you need to follow to apply the code. Using the Magnavox universal remote codes, you can easily control your TV or device. Just scroll down below, and you will get the proper instruction and the list of the codes you can use for the TVs. Also, you can find Magnavox blu-ray player remote codes.

Magnavox Universal Remote Codes List

The remote codes are necessary to program the universal remote, which recognizes the device to enable the setup. In this post, you can find all the Magnavox universal remote codes.

How To Program Magnavox Universal Remote With Auto-Code Searching Method

You don’t need to enter a code in the auto-code searching method manually. The codes stored in the remote memory will send the correct code to the device and pair itself with the device. Follow the steps below to program your Magnavox universal remote.

1. If you want to program your remote for the Tv, turn it on.
2. Find the “code search” button on top of the remote, and press and hold that button until the LED indicator stays solid.  
3. Now press the “TV” button on the remote.
4. After this, face the remote to the device, press and hold the “POWER” button on the remote until the TV turns off. 
5. Once done with this procedure, press the “ENTER” button within 4 seconds to save the code and settings. 
6. Finally, turn on the TV with the help of the remote power button. Check all functions, such as volume control, changing the channels, and more. If everything works well, it means your remote is programmed successfully. If not, try to reprogram the remote from step 1. 

How to Program Magnavox Universal Remote with Manual Setting

You don’t need to enter a code manually in this method. The remote and device will pair together by sending and matching unique codes. Follow the instructions stated below.

1. Turn on the component, for example, the TV.
2. Press the “code-search” button on the remote until the LED indicator is lit. 
3. Now once press and release the “TV” button on the remote.
4. Locate the remote sensor to the Tv and press the “POWER” button continuously to send several IF signals of “POWER OFF.”
5. Now this time, your device will turn off. Press the “ENTER” button within four seconds to save the code and settings in the remote.
6. Finally, locate the remote to the device and press the “POWER” button to turn on the Tv. If your Tv responds with the command, your remote is programmed successfully. If not, repeat the same programming procedures until your device is paired with the device.

Magnavox Universal Remote Instructions

Like all-universal remotes, Magnavox allows users to program them with a code. If you are new to remote programming, follow the instructions stated below. Note down the correct code for your device before going to programming.

1. You have to ensure that the remote’s batteries are correctly working, then “Turn on the TV.”
2. After that, you need to press and hold the TV and the  SEL button for the “3 seconds”. You will see that the button will light.
3. Now, you need to point the Magnavox universal remote at the TV and enter the code, which you have to choose from the list of codes above.
4. It would help if you pressed the VOLUME + button to verify the Magnavox remote codes to increase the TV volume.
5. It would help if you pressed the button on the TV and you would see that the button would blink twice.

Final Words

Everybody lives such a busy and challenging life in today’s world. To make life easier, you can use the Magnavox universal remote codes. You need to enter the code from the list, and I am sure after using the above straightforward process. You will not face any errors. But in case your code is not working, then let us know.