Soundbar

Sceptre Soundbar Universal Remote Codes & Program

Do you want to pair your universal remote with a sceptre soundbar? If yes, then you are on the right page. We have posted all the latest working remote codes to operate your Sceptre Soundbar efficiently.

Also, you can find codes not only for universal remotes but also for Cable or SAT remotes. Below you can also find the best remote programming methods to program the sceptre tv remote codes for a Soundbar.

You need to follow the correct programming methods and remote codes. Without Sceptre Soundbar remote codes, you can’t program and operate your device with a remote.

Sceptre Soundbar Universal Remote Codes List

These universal remote codes are 4-digit, 5-digit, Directv, and one for all codes that work according to your remote brand and version. So you must choose the remote codes wisely from the available code list and program your remote.

See also  Bose Soundbar Universal Remote Codes & Program

11360

10000

11599

11217

10878

How to Program Sceptre Soundbar Universal Remote:

There are many ways to program a sceptre Soundbar remote. Some of them are Comcast or Directv code search, key code, and manual setup methods. You can use any of these programming methods, and if a method is not working correctly, then you need to choose an alternative approach, such as the Huayu remote code for the Samsung TV.

Here, I will guide you on how to program the One For All universal remote to your Sceptre Soundbar. Follow the instructions stated below. 

You can program the One For All remote in three ways: simple set, code entry and holding a digit assigned for the device brand. 

Simple set method: 

  1. Press the “SETUP” key on the remote until the light blinks twice.
  2. After this, press the “AUD” button.
  3. Enter the code you selected for your Sceptre Soundbar.
  4. Finally, The LED blinks twice to confirm the code.
  5. Now your remote is ready to use.
See also  Denon Soundbar Universal Remote Codes & Program

If the indicator does not blink two times at the end of the procedure, follow the instructions below.

  1. Hold the “SETUP” button until the LED light flashes twice.
  2. Now, enter 9-9-2. The LED light will flash twice.
  3. Press the “AUD.” the LED indicator will flash twice.

If it does, your remote is ready to control your Sceptre Soundbar. 

Conclusion

We hope you’ll find this helpful article to program your remote control for the Soundbar. Please share your feedback & experience with us and help us to improve.

About the author

Andrew

I am Andrew author of this blog I do write articles related to tech and i am expert in programming universal remote with any brand and good at fixing the issues while setup remotes

Add Comment

Click here to post a comment