Blu-ray Player

Philips Blu-Ray Universal Remote Codes & Program

Are you searching for Philips Blu-ray universal remote codes? To operate your Philips Blu-ray player with your favourite universal remote, you must need Philips Blu-ray codes for universal remote and remote programming instructions. Here we have updated all Philips Blu-ray player remote control codes and step-by-step instructions to set up the remote control. Scroll down this page till the end, and you will find all the important instructions and Phillips remote codes that are compatible with your remote brand here.

Philips Blu-ray Universal Remote Codes List

Philips Blu-ray remote codes are generally 4-digit, 3-digit, and 5-digit. These codes are required while programming the remote to control any smart device. Below, you will find universal remote codes for all universal remote brands, including Philips DVD player codes. Find out which type of codes your remote will accept and choose a code wisely.

How to Program Philips Blu-ray Universal Remote?

Many methods are available to program the Philips Blu-ray player, like code entry, auto-code, and brand code search. Choose Philips Blu-ray receiver remote codes from the given code list for your remote brand. If you want to set up Soundbar, you only have to follow Philips soundbar instructions. I will give an example of universal remote programming instructions here, which may help you to understand remote programming. Also, you can find the remaining programming instructions on this website.

  1. Connect all the power cables correctly and turn on your Philips Blu-ray player.
  2. Insert new batteries into the remote and locate it to the Blu-ray player sensor.
  3. Press the “SETUP” button on the remote until the LED light turns on. 
  4. After this, press the “DVD” or “Blu-ray” button on the remote.
  5. Enter the code to pair your universal remote to the Philips Blu-ray player.
  6. The LED light turns off after entering the code.
See also  Vizio Blu-Ray Universal Remote Codes & Program

Finally, test the Blu-ray player functions using the remote control. The remote is ready to use if all the functions work as expected. If not, try to reprogram your remote using the next code or switch to an alternative method to program your universal remote for the Philips Blu-ray player.

Conclusion

Please share your feedback if this article is helpful and working as expected. It will help us to boost user performance and make the required improvements to our website. Also, comment us if you find any new working universal remote codes that are not available here.

 

About the author

Andrew

I am Andrew author of this blog I do write articles related to tech and i am expert in programming universal remote with any brand and good at fixing the issues while setup remotes

Add Comment

Click here to post a comment